(Above) Attach the legs on one side first. If you are alone, start in one corner, then move to the other corner, saving the middle leg for last. Make sure that you tighten the leg bolts.
(above) Using the grommets that the corner base of the valance, attach the valance to the corner leg pipes. This will give you valance a tight "professional" look.
(above) Attach the legs on the other side of the frame following the same pattern as you used for the other side. Attach the valance to the legs (as discussed in the section above this one). Your canopy should look like the one above. At this point it is imperative that you secure your canopy to the ground to prevent "hang-gliding."
10x10 CANOPY
FOR $58.00 
